Looking for:
Stx38 manual download |
Toro STX-38 Operator's Manual.Stx38 manual download
Navigation menu.Stx38 manual download
This technical manual is written for an experienced technician and contains sections that are specifically for this product. It is a part of a total product support program.
The manual is organized so that all the information on a particular system is kept together. The order of grouping is as follows:. Note: Depending on the particular section or system being covered, not all of the above groups may be used. Each section will be identified with a symbol rather than a number. The groups and pages within a section will be consecutively numbered. All information, illustrations and specifications in this manual are based on the latest information available at the time of publication.
The right is reserved to make changes at any time without notice. We appreciate your input on this manual. To help, there are postage paid post cards included at the back.
If you find any errors or want to comment on the layout of the manual please fill out one of the cards and mail it back to us. This is the safety-alert symbol. When you see this symbol on your machine or in this manual, be alert to the potential for personal injury. Replace missing or damaged safety signs. When you work around fuel, do not smoke or work near heaters or other fire hazards.
Store flammable fluids away from fire hazards. Do not incinerate or puncture pressurized containers. Keep emergency numbers for doctors, ambulance service, hospital, and fire department near your telephone. Battery gas can explode. Use a volt-meter or hydrometer.
It is strong enough to burn skin, eat holes in clothing, and cause blindness if splashed into eyes. Filling batteries in a well-ventilated area.
Wearing eye protection and rubber gloves. Avoiding breathing fumes when electrolyte is added. Avoiding spilling or dripping electrolyte. Use proper jump start procedure. Flush your skin with water. Apply baking soda or lime to help neutralize the acid. Get medical attention immediately. Drink large amounts of water or milk.
Then drink milk of magnesia, beaten eggs, or vegetable oil. Avoid injury from escaping fluid under pressure by stopping the engine and relieving pressure in the system before disconnecting or connecting hydraulic or other lines.
Tighten all connections before applying pressure. Search for leaks with a piece of cardboard. Protect hands and body from high pressure fluids. If an accident occurs, see a doctor immediately. Any fluid injected into the skin must be surgically removed within a few hours or gangrene may result.
Doctors unfamiliar with this type of injury should reference a knowledgeable medical source. Flammable spray can be generated by heating near pressurized fluid lines, resulting in severe burns to yourself and bystanders. Do not heat by welding, soldering, or using a torch near pressurized fluid lines or other flammable materials.
Pressurized lines can be accidentally cut when heat goes beyond the immediate flame area. Prolonged exposure to loud noise can cause impairment or loss of hearing. Wear a suitable hearing protective device such as earmuffs or earplugs to protect against objectionable or uncomfortable loud noises.
Operating equipment safely requires the full attention of the operator. Do not wear radio or music headphones while operating machine. Tie long hair behind your head. Do not wear a necktie, scarf, loose clothing, or necklace when you work near machine tools or moving parts. If these items were to get caught, severe injury could result. Remove rings and other jewelry to prevent electrical shorts and entanglement in moving parts.
Use tools appropriate to the work. Makeshift tools and procedures can create safety hazards. Use power tools only to loosen threaded parts and fasteners. For loosening and tightening hardware, use the correct size tools. Avoid bodily injury caused by slipping wrenches. Use only service parts meeting John Deere specifications. Lower all equipment to the ground. Stop the engine and remove the key. Disconnect the battery ground strap.
If you must work on a lifted machine or attachment, securely support the machine or attachment. Do not support the machine on cinder blocks, hollow tiles, or props that may crumble under continuous load. Do not work under a machine that is supported solely by a jack. Follow recommended procedures in this manual. Lifting heavy components incorrectly can cause severe injury or machine damage. Follow recommended procedure for removal and installation of components in the manual. Clean work area and machine.
Make sure you have all necessary tools to do your job. Have the right parts on hand. Read all instructions thoroughly; do not attempt shortcuts. Reduce pressure and spray at a 45 to 90 degree angle. Illuminate your work area adequately but safely. Use a portable safety light for working inside or under the machine.
Make sure the bulb is enclosed by a wire cage. The hot filament of an accidentally broken bulb can ignite spilled fuel or oil. Engine exhaust fumes can cause sickness or death. If it is necessary to run an engine in an enclosed area, remove the exhaust fumes from the area with an exhaust pipe extension. If you do not have an exhaust pipe extension, open the doors and get outside air into the area.
Avoid breathing dust that may be generated when handling components containing asbestos fibers. Inhaled asbestos fibers may cause lung cancer. Components in products that may contain asbestos fibers are brake pads, brake band and lining assemblies, clutch plates, and some gaskets.
The asbestos used in these components is usually found in a resin or sealed in some way. Normal handling is not hazardous as long as airborne dust containing asbestos is not generated. Avoid creating dust. Never use compressed air for cleaning. Avoid brushing or grinding material containing asbestos.
When servicing, wear an approved respirator. A special vacuum cleaner is recommended to clean asbestos. If not available, apply a mist of oil or water on the material containing asbestos.
Keep bystanders away from the area. Diesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm. Gasoline engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Avoid potentially toxic fumes and dust. Hazardous fumes can be generated when paint is heated by welding, soldering, or using a torch. Do all work outside or in a well ventilated area. Dispose of paint and solvent properly. Remove paint before welding or heating: If you sand or grind paint, avoid breathing the dust.
Wear an approved respirator. If you use solvent or paint stripper, remove stripper with soap and water before welding. Remove solvent or paint stripper containers and other flammable material from area.
Stx38 manual download.!! 134154462 John Deere Stx30 Stx38 Stx46 Service Manual
Table Of Contents. Quick Links Download this manual. Register at www. Model No. Table of Contents. Previous Page. Next Page. Dealer or Toro Customer Service and have the model and serial numbers of your product ready. Use only the accessories Improper use or maintenance by the operator or owner and attachments that are approved by the can result in injury. Changes in the terrain, such as starting the engine. Start the engine only from the moisture, can quickly affect the operation of operator's position.
Page 7 decal decal 1. Entanglement hazard, belt—stay away from moving parts; keep all guards and shields in place. Thrown object hazard—keep bystanders a safe distance away from the machine. Warning—do not touch the hot surface. Page 8 decal 1. Engine—start 5. Engine speed—slow 2. Engine—run 6. Engine indicator light 3.
Engine—stop 7. Read the Operator's Manual before starting the engine—1 Ensure that the traction control is in the neutral position; 2 Move the throttle lever to the Fast position, close the choke if applicable , and do not operate the Page 9 decal 1. Turn right 3. Reverse 2. Forward 4. Turn left decal 1. Warning—read the Operator's Manual. Explosion and electric shock hazard—do not dig in areas with buried utility lines; contact local power organizations before digging.
Page Setup Setup Product Overview Checking the Fluid Levels Before starting the engine for the first time, check the engine-oil and hydraulic-fluid levels. Throttle Lever Move the control forward to increase the engine speed and rearward to decrease the engine speed. To ensure optimum performance and continued safety certification of the machine, use only genuine Toro replacement parts and accessories. Page Performing Daily Maintenance Filling the Fuel Tank Starting the Engine Park the machine on a level surface, engage Move the throttle lever midway between the the parking brake if applicable , and lower the and F positions Figure Shut off the engine, remove the key, and allow the engine to cool.
The farther you move the traction controls in any direction, Important: Do not tow or pull the machine the faster the machine moves in that direction. Page Maintenance Maintenance Note: Determine the left and right sides of the machine from the normal operating position.
Grease it immediately after every washing. Procedures To install the front cover, slide the front cover into place and tighten the 2 bolts that you loosened Important: The fasteners on the covers of this previously Figure Loosen all fasteners on each cover a few immediately after every washing.
Every hours—Replace the primary air filter more often in dusty or sandy conditions. Every hours—Check the inner air filter. Every hours—Replace the inner air filter. Start the engine and let it run 5 minutes. Note: This warms the oil so that it drains better. Park the machine so that the rear is slightly lower than the front to ensure the oil drains completely.
Page Fuel System Maintenance Fuel System Open the fuel-shutoff valve and allow the fuel to drain into a fuel can or drain pan. Maintenance Note: If desired, you can replace the fuel filter at this time; refer to Replacing the Hydraulic Filter page Draining the Fuel Tank Install the fuel line onto the fuel-shutoff valve. Install a new filter and move the hose clamps Maintenance close to the filter. Turn the fuel-shutoff valve to the open position. Servicing the Battery Check for fuel leaks and repair if needed.
Wipe up any spilled fuel. Charging the battery produces gasses that Shut off the engine and remove the key. Lift the black rubber cover on the negative cable. Disconnect the negative battery cable from the Never smoke near the battery and keep sparks negative - battery terminal Page Replacing The Fuses Wash the entire case with a solution of baking soda and water.
Rinse the battery with clear water. Install the battery; refer to Installing the Battery page Park the machine on a level surface, engage the Service Interval: Every hours parking brake, and lower the hydraulic lift.
Park the machine on a level surface, engage the Shut off the engine and remove the key. Page Cooling System Maintenance Cooling System depleted, clean out all the grease, replace the gasket, and add new grease. Maintenance Ensure that the road wheel turns smoothly on the bearing. If it is frozen, contact your Authorized Service Dealer to replace the road wheel. Cleaning the Engine Screen Place the greased road wheel cap over the bolt head Contact your Authorized Service Dealer for a replacement belt.
The factory adjusts the traction controls before shipping the machine. Page 36 g Figure 55 1. Traction control 2. Stem, bolt, and nut Adjust the traction control so that it rests flush against the reference bar when it is pulled g Figure 57 straight back Figure 55 Figure Traction rod 2.
Alternative fluids: If the Toro fluid is not available, other conventional, petroleum-based fluids may be used, provided they meet all of the following material properties and industry specifications.
Remove the hydraulic tank drain plug and allow Replacing the Teeth the fluid to drain into the pan Figure Service Interval: Before each use or daily—Check the condition of the teeth; Park the machine on a level surface, engage the parking brake if applicable , and lower the hydraulic lift. Page 41 Storage With the spark plug removed from the engine, pour 2 tablespoons of engine oil into the spark-plug hole. Park the machine on a level surface, engage the Place a rag over the spark-plug hole to catch parking brake, and lower the hydraulic lift.
The battery is discharged. Charge the battery or replace it. The electrical connections are 2. Check the electrical connections for corroded or loose. The relay or switch is damaged. Turn the control dial counterclockwise to open it. The hydraulic fluid overflows or is very hot. The cooling fan is not functioning. Page 44 Schematics g Electrical Schematic Rev. A Page 45 g Hydraulic Schematic Rev. A Page 46 Notes Page 47 The Way Toro Uses Information Toro may use your personal information to process warranty claims, to contact you in the event of a product recall and for any other purpose which we tell you about.
Toro may share your information with Toro's affiliates, dealers or other business partners in connection with any of these activities. We will not sell your personal information to any other company. Moreover, if Toro does not provide these warnings, it could be sued by the State of California or by private parties seeking to enforce Prop 65 and subject to substantial penalties.
This manual is also suitable for: Print page 1 Print document 48 pages. Cancel Delete. Sign In OR. Don't have an account?
Sign up! Restore password. Upload from disk.
No comments:
Post a Comment